DAP ALEX FAST DRY® Acrylic Latex Caulk Plus Silicone 10. FL OZ

DAP® ALEX FAST DRY® ACRYLIC LATEX CAULK PLUS SILICONE is specifically formulated to meet the demanding needs of professional painters and deliver outstanding paint finish results. 

DAP acrylic latex caulks are ideal for filling and sealing gaps and cracks around window and door frames, molding, trim, baseboards, corner joints, and more. They have excellent adhesion to painted and unpainted wood, aluminum, vinyl, metal, brick, drywall, concrete and masonry.

Features & Benefits

• Paint ready in 20 minutes
• Interior/exterior use
• Won't shine through or discolor paint
• Resists cracking & chalking
• Exceeds ASTM C834
• Reduced dirt pick-up
• 50 year warranty
• 100% waterproof seal
• Cured caulk is mold & mildew resistant
• Easy water clean-up
• Low odor
• Easy and smooth application
• Durable and waterproof seal

Proper Surface Preparation is Key

Remove any old caulk from the seam or joint by cutting or scraping it away. Then clean the area with soap and water to remove dirt, dust, grease or debris. Rinse thoroughly. Make sure the area to be sealed is clean and dry to ensure good adhesion.

Want straight lines?

Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over – about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.

Get a Professional-Looking Finish

To get a professional-looking finish after the sealant has been applied, smooth the bead of sealant with a caulk finishing tool dipped in water. Do this before the sealant starts to skin over, about 2-5 minutes.

FAQ's

Is this caulk available in other colors?

No, it is only available in white

Can I use this in a shower?

No. The product is not applicable for use in a bath or shower.

The label says that this product is dry in 40 minutes, is it cured then, too. ?

No, cure time will vary depending on bead size and conditions, but could take 7 – 14 days to fully cure

What is the maximum joint size for applying DAP® ALEX® acrylic latex caulks?

The joint size shouldn’t exceed ½” wide by ½” deep. If the joint depth exceeds ½”, insert foam backer rod material into the joint before applying the sealant.

Can DAP® ALEX® acrylic latex caulks be used outside?

Yes, DAP® ALEX® acrylic latex caulks can be used in both interior and exterior applications. For exterior applications, they should be applied in temperatures above 40°F, and not when rain or freezing temperatures are forecasted before a full cure can occur. Cold weather and high humidity may slow down cure time.

What is the recommended clean-up for DAP® ALEX® acrylic latex caulks?

Before drying, they can be easily removed with soap and water. After the caulk has dried, it will need to be cut or scraped away.

Where can I use DAP® ALEX® acrylic latex caulks?

DAP® ALEX® acrylic latex caulks are ideal for filling and sealing gaps and cracks around window and door frames, molding, trim, baseboards, corner joints, and more. They have excellent adhesion to painted and unpainted wood, aluminum, vinyl, metal, brick, drywall, concrete and masonry.

What are paint shiners?

Shiners are unsightly glossy spots that appear when some flexible sealants are painted. DAP® ALEX PLUS®, ALEX FAST DRY® and ALEX FLEX® will not gloss or discolor paint.